Once I was asked if it is possible to change the dimensioning in the
drawing from mm to inch and backwards, and to convert the units properly at the
same time.
Yes it is.
You just have to change the dtl opitons...
dual_dimensioning and dual_secondary_units
...to the szenario you want to have: mm->inch or inch->mm
(you can also use foot,cm,m)
For example:
dual_dimensioning SECONDARY
dual_secondary_units INCH
Now if you had the drawing in mm ProE uses the secondary unit(INCH)
and converts it automatically.
e.g. 100mm->3,94inch
Was this Post helpful for you?
With engineered regards